Red Spindel Mould for Biothane - 38 mm
- Item
- # MT022785
With this spindle mould, you no longer need to estimate where the Biothane should be placed under the hole pipe. If you have marked it off with a pen, place the Biothane in the template and you will be able to punch exactly in the middle. Suitable for Biothane 38 mm.
Red Spindel Mould for Biothane - 38 mm
With this spindle mould, you no longer need to estimate where the Biothane should be placed under the hole pipe. If you have marked it off with a pen, place the Biothane in the mould and you will be able to punch exactly in the middle. Suitable for Biothane 38 mm.
There are extra guidelines on the sides that are 1.5 cm apart. This means that for longer pieces you don't have to mark them out yourself anymore because you can align the holes you have already made.
Only to be used in combination with a 12 mm anvil
Specifications
- 3D printed
- Colour: Red
- For making Biothane adapters/products
- Suitable for 38 mm Biothane
- With guiding lines
| Item # | MT022785 |
|---|---|
| Sold per | 6 |
| Weight | 20 gram |
| Color | 93 |
| Feed through size | 683 |
| Material | 306 |